Optimize Your Manufacturing Process and Design Options Using Adhesives


  • The fast, easy and secure threaded pipe sealing cord!

    LOCTITE 55

    > Seals and locks
    > A liquid sealer which seals threads 100%
    > Approvals for Hot & Cold Water, Potable Water, Gas and LPG
    > Immediate seal: 6 bar

  • LOCTITE 7063

    Parts Cleaner - general purpose.

    For use prior to bonding and sealing applications.

    Leaves no residue.

  • Self-fusing silicone rubber wrap for temporary repairs on flexible hoses and pipes. Resistant to UV light, salt water, fuels and acids.

    LOCTITE SI 5075

    LOCTITE SI 5075 is a non-sticky, self-fusing, multi-purpose wrap for tape-based repair situations. Offering a tensile shear strength of 50 kg/cm², the tape stretches to three times its size and seals instantly. It is resistant to UV, salt water, fuels and acids. LOCTITE SI 5075 also offers dielectric strength up to 15kV/mm and a service temperature range of -54 to +260°C.

Note:
Only part of the HENKEL GI range is displayed.
For each product there is a link to the official HENKEL Loctite website from where you can download the TDS and MSDS documents.
Much more can be found at: http://www.loctite.com/, or contact the SA2M expert team.

Loctite® 243

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing
  • М36 / -55ºC to +150ºC

Loctite® 2701

  • High strength, especially for chromated surfaces
  • Low viscosity
  • Fluoresces to allow quality control and inspection
  • Prevents unwanted movement, loosening, leaks and corrosion
  • Resists vibration
  • Seals threads - allows through-hole tapping
  • М30 / -55ºC to +150ºC

Loctite® 268

  • High bond strength
  • Convenient stick format prevents dripping
  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates
  • Proven to be tolerant of minor contamination due to industrial oils
  • Can be disassembled by heating to 300°C
  • М50 / -55ºC to +150ºC

Loctite® 222

  • Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws
  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Permits disassembly with hand tools
  • Especially suited to small thread sizes
  • М36 / -55ºC to +150ºC

Loctite® 3430

  • Easy and fast to apply at room temperature
  • Ultra-clear bond line
  • Water resistant
  • General purpose bonder - suitable for a wide range of substrates
  • Working temperature: -55ºC to +100ºC

Loctite® 3463

  • Steel-filled kneadable stick
  • For the emergency repair of tanks, pipes and castings
  • Operating temperature range -55 °C to +120 °C

Loctite® 3474

  • Repairs holes in tanks, leaks in pipes and elbows
  • Renews stripped threads
  • Rebuilds worn steel parts
  • Fast-curing, steel-filled, non-sagging
  • Ideal for emergency repairs
  • Can be used for running repairs to prevent down time
 

Loctite® 3479

  • Rebuilds and repairs worn metal parts in high operating temperature applications
  • Non-sagging, heavily reinforced, aluminium powder-filled 2-part epoxy
  • Easily mixed and moulded to form odd shapes if required
  • Cures to a non-rusting, aluminium-like finish

Loctite® 401

  • Universal instant adhesive
  • Very high strength on close-fitting parts
  • Perfect for all quick repairs and all types of small emergency repairs.
  • Bonds a wide range of similar or dissimilar substrates
  • Working temperature: -40ºC to +120ºC

Loctite® 406

  • Rapid bonding of plastic & rubber, including EPDM
  • LOCTITE 770 or LOCTITE 7239 primer improves adhesion of difficult-to-bond substrates
  • Working temperature:-40ºC to +120ºC

Loctite® 435

  • Ideal for bonding small to medium-size parts
  • Well suited to metals, rubbers and plastics
  • Well suited to porous and/or acidic surfaces
  • Fixture time of 10 - 20 secs
  • Solvent-free

Loctite® 454

  • Universal instant adhesive gel
  • Will not drip or run
  • Non-wicking, specially suited to porous materials
  • Perfect for all quick repairs
  • Ideal for overhead application and vertical faces
  • Working temperature: -40ºC to +120ºC

Loctite® SI 5910

  • For use with flexible flanges
  • Good resistance to oil and joint movement
  • Can be supplied in cartridges, tubes or rocep cans
  • Reduces migration of liquid after application

Loctite® 510

  • High temperature resistant flange gasket
  • For metal flanges
  • Adapts to flange surface irregularities and scratches up to 0,25 mm
  • Increases the torque capacity of assembled flanges

Loctite® 518

  • Semi-flexible, medium-strength anaerobic flange gasket
  • For active and inactive rigid metal flanges
  • Cures through minor surface contamination
  • Adapts to flange surface irregularities and gaps up to 0,25 mm
  • Gel-type consistency
  • Seals instantly against low pressure
  • Resists high pressure when fully cured

Loctite® 577

  • Medium-strength, general purpose thread sealant for sealing metal threads
  • Suitable for all metals
  • Instant low pressure seal
  • Excellent chemical resistance
  • Locks connection against vibration-induced loosening and other stresses
  • Easy to apply
  • Cures on active and inactive metals

Loctite® 603

  • High-strength retaining compound
  • Especially suitable for sintered bearings
  • High oil tolerance
  • Diametrical clearance to 0,1 mm.
  • Service temperature range: -55ºC to +150ºC

Loctite® 620

  • High temperature resistance
  • Ideal for retaining pins in radiator assemblies, sleeves in pump housings and bearings in auto transmissions
  • DVGW approval (EN 751-1): NG-5146AR0622
  • Service temperature range: -55ºC to +230ºC

Loctite® 638

  • High temperature resistance
  • Tolerates minor contaminants, including industrial oils
  • High strength on all metals, including passive substrates (e.g. stainless steel)
  • Ideal for shafts, gears, pulleys and similar cylindrical parts
  • Service temperature range: -55ºC to +180ºC

Loctite® 660

  • Ideal for repairing worn parts without remachining
  • Enables re-use of worn bearing seats, keys, splines or tapers
  • Suitable for retaining shims
  • Service temperature range: -55ºC to +150ºC

Loctite® 7039

  • For cleaning electrical contacts, relays, switchgear, etc, which are exposed to moisture or other contamination
  • Does not affect insulating varnishes
  • Operating temperature range of -30 °C to +50 °C

Loctite® 7200

  • Removes cured gasket sealants and traditional gaskets in 10 to 15 minutes
  • Minimal scraping
  • Usable on most types of surface

Loctite® 770

  • Surface Preparation - polyolefin primer
  • Only for difficult-to-bond plastics
  • Improves adhesion of instant adhesives to polyolefins and other low surface energy plastics

Loctite® 7063

  • General-purpose product for cleaning and degreasing any kind of surface
  • Solvent-based general parts cleaner
  • Ideal for use prior to adhesive bonding and sealing applications
  • Leaves no residue
  • Removal of most greases, oils, lubrication fluids, metal cuttings and fines from all surfaces

Loctite® 8008

  • Anti-seize lubricant paste in a brush top can, with copper and graphite suspended
  • Resistant to very high temperatures up to +980°C
  • Unique brush top
  • It has an NLGI grade of 0
  • Protects from rust, corrosion, galling and seizing
  • Used for screws, nuts, pipes, exhaust bolts and brake calliper bolts

Loctite® LB8014

  • Food grade lubricant and anti-seize
  • Metal-free
  • Temperature resistant to +400°C
  • NLGI Grade 0
  • Prevents friction, seizing and galling in stainless steel and other metal parts
  • H1 NSF Reg. No.: 123004
  •  

Loctite® LB8040

  • Lubricant - emergency repair
  • Shock freezing (-40°C). Releases rusted, corroded and seized components
  • Universal application
  • Bactericide-free
  • Highly resistant to micro-organisms, bacteria and fungi
  • Excellent cooling and lubrication performance
  • Low foaming

Loctite® LB8201

  • Five-way spray
  • Frees assemblies
  • Lubricates metal
  • Cleans parts
  • Displaces moisture
  • Prevents corrosion